Program add smartkey LEXUS ES350 2007 by OBDSTAR KEY MASTER DP PLUS

 

OBDSTAR X300 DP Plus X300 PAD2 is a new Android-based vehicle trouble diagnostic device developed for internet applications.
The following is a graphic description:
4-1
4-2
4-3

Original key and a new key
In X300 DP Plus, select Toyota/Lexus->Smart Key System->Type 4 (with H)->Program Smart Key

4-4
4-5
4-6
4-7

Put an emulator ke close to the ignition switch and turn it ON till the dashboard turns on
4-8
4-9

Put an available key close to the ignition switch and turn on ignition, then buzzer beeps once

4-10
4-11
Close a new smart key to the Start button
4-12
Programming new key in process
4-13

Program success.
Test the new key.
4-14
4-15
4-16
4-17
It works.

Done.

评论

发表评论

此博客中的热门博文

2012 Buick new LaCrosse engine idle learning operation method on launch X431 V/X431 V+ (pro3) PAD

图片
  2012 Buick new LaCrosse engine idle learning operation method on launch X431 V / X431 V+ (pro3) PAD Measured models: Buick LaCrosse 2.4L, Engine Model LAF, 2012 models, VIN=LSGGF53W2CH1***** Steps: Select China General V48.90 or later. Select manual selection, note that you can not choose online programming. Select “Buick”. Select year 2012. Select “New LaCrosse”. Select “engine control module”. Select Engine Type 2 “2.4 liters (LAF)”. Select “Configuration/Reset Function”. Select “learning function”. Select “Immediately read in”. A prompt box appears, choose to confirm press Niu, as shown in Figure 10. 12.Enter the function operation interface, display the corresponding data flow value andoperation status value, the command status shows “None”, as shown in Figure 11. 13.Click on the “Reset” button below and the execution will be changed to “Reset”, as shown inFigure 12. 14.The key is closed, click the exit button, the operation is over. If you are interes...
阅读全文

How to connect to C4

图片
After MB SD C4 is connected to Windows, wifi Road24h will remain disconnected and reconnect randomly. What should you do? Industrial Grade WIFI MB Star SD Connect C4 With AM79C874Vi And ADG426B Chips For Benz Free V2019.09 Software After C4 star diagnosis is connected to Windows, wifi Road24h will remain disconnected and reconnect randomly. What should I do? 1.Try to configure the Wi-Fi adapter to use the 5Ghz network in ad-hoc links. If this is not possible, analyze the spectrum of the workshop and use a less saturated channel. 2.Try another ip. 3.If you want a solid connection, always use a LAN cable (for normal PC use, as well as car diagnostics). MB Star SD Connect C4 Wire Connection Picture: MB SD C4 Wireless Connection Picture :   more information at https://www.cnautotool.com/category-192-b0-MB+STAR.html
阅读全文

Piwis 2 or Piwis 3, Purchase which one?

图片
  Follow the Piwis 3 for Porsche diagnostic and programming appeared, most customers inquiry for the Piwis 3 to replace Piwis tester 2 for Porsche new models. Some client asks what’s the difference between Piwis tester 2 & Piwis 3. whether the Piwis 2 work with the Piwis 3 software? Share one client opinion for this. Piwis 2 or Piwis 3, Purchase which one? It may be an interesting subject, I’m sure there is some information about this out here. Firstly, the Piwis 2 interface is a lot more robust piece of equipment, compared to the cheesy and flimsy looking and feeling interface produced by Actia for Piwis 3. Originally designed for the VW ODIS system, the VAS 6154 VCI is quite the service needy piece. (Breaks easily)not a hard comparison to make. Is it worth to purchase Piwis 3 replace Piwis 2 now? Can the Piwis 2 compatible with Piwis 3 Software? This answer for the question of whether Piwis 3 software can work with Piwis 2 Samtec HSX Interface from Piwis-Test...
阅读全文